Wire & Cable

DLF450(-2) Series is type machine is a slight-sliding wire drawing machine with fully submersible lubricant cooling chamber, driven by independent servo motors, specifically design for copper material.

DB Multi-wire horizontal drawing machine is a machine series design for intermediate plus fine wire drawing for copper, aluminum, their alloy material . Our machines are designed to ensure reliable production, energy saving and maximum flexibility ensuring high wire quality minimizing wire scraps and breakages. Basic wire quantity is 8/16/24 wire . It’s a new generation machine design for high capacity conductor manufacturing.

Brass wire drawing is the process of reducing a brass wire/rod’s cross-sectional area by pulling via a drawing die. A single or multiple dies can be used to achieve the desired cross-section.

There are several uses to which you apply drawn brass wires across industries. Some of these uses are described below:

1. Brass cables for varied uses such as conductive cables are made by wire drawing.

2. Some wheel spokes can be fashioned by wire drawing.

3. Wire drawing of brass can be used in making springs and paper clips.

4. Guitars, violins, harps, and other similar instruments employ wire drawing to make the strings.

DLVF450 / DLVF450-2 Series is type machine is a slight-sliding wire drawing machine with fully submersible lubricant cooling chamber, driven by independent servo motors , specifically design for Aluminum and its alloy.

DL400/450(-2) Series is designed for Copper rod breakdown process for Electric usage . Adopt tradition gear shaft transmission but with improved design . It’s a economic choice for the manufacturer with specific product . WI

DLV400/450(-2) Series is machine line specifically designed for Aluminum / 800X and 600XAluminum alloy rod breakdown process for Electric usage. Usually combined with pay-off system + tension unit and 1~2 type of take-up device to form a whole production line . Whole production usually is without annealing unit compared to Copper RBD line.

ZL250/280 series is designed for intermediate wire drawing process for single and dual wire

Intermediate wire drawing machines play an important role in metal processing. They can draw metal wires into various specifications and shapes. They are widely used in producing wires and cables, optical fiber cables, electronic components, auto parts, and other products.

The working principle of the intermediate wire drawing machine is to use the elasticity and plasticity of metal wires to gradually stretch and process the metal wires into the required shapes and specifications through a series of molds and fixtures. During the wire drawing process, the metal wire is clamped and stretched by multiple molds and clamps, and after precise processing, it is finally formed into the required shape and specifications.

Brass wire drawing is the process of reducing a brass wire/rod’s cross-sectional area by pulling via a drawing die. A single or multiple dies can be used to achieve the desired cross-section.

There are several uses to which you apply drawn brass wires across industries. Some of these uses are described below:

1. Brass cables for varied uses such as conductive cables are made by wire drawing.

2. Some wheel spokes can be fashioned by wire drawing.

3. Wire drawing of brass can be used in making springs and paper clips.

4. Guitars, violins, harps, and other similar instruments employ wire drawing to make the strings.

SN300/7 small spool automatic changeover take-up machine is a take-up device designed for fine wire drawing machine (usually without annealer), as the manufacturing line speed is fast and the take-up spool of fine wire drawing machine is small, so the take-up reel require constant change and it’s the most often operation action for this machine.

This machine can operate synchronizing with fine wire drawing machine, to achieve a line to automatically stop , wire spool changeover, empty/finished wire reel storage, making sure one machine operator can look over as more machine as possible .

This machine series is design for extra fine wire manufacturing , basically it’s the conductor wire thinner than 0.1mm. Conductor in this size range are usually used in precision electronic industry , also will usually treated with surface treatment such as tinning , electrolytic and enameling.

3T Series Triple Twist Pair Twisting Machine is a all-in-one machine designed to manufacture the pair twisting process for data / lan cable . It’s dedicated to replace the space-costing , relatively low speed traditional double twist pair twisting machine with vertical back-twisting pay-off . It can be suitable for the qualified lan cable production of cat 5~6A with solid PE insulation . For foaming insulation core wire pair twisting , it can be qualified as well for cat 7 . 

PTB Series Double Twist Pair Twisting Machine Line is a traditional machine designed to manufacture the pair twisting process for data / lan cable with HOOHA upgrade . The machine usually will collaborate with vertical or horizontal back-twisting pay-off . When working with vertical back-twsiting pay-off , it would be a traditional and budget machine model for manufacturing lan cable of cat 5~6 . When working with horizontal back-twisting pay-off , it would be the perfect machine setup for lan cable cat 6a~8 that with foaming insulation . 

ST Series Cantilever Type Single Twist Stranding Machine Line is a machine line designed to manufacture the the cabling or assembly process for insulated core / twisted pair / taped wire , etc . By collaborating with different components can allow the line to be suitable for different cable types including regular electric cable , lan cable , HDMI cable and else for different function . 

DT series wire bunching machines are mainly used for stranding and cable lay off of power cables, electronic cables, telephone cables, lan cables, computer cables, with different types of payoffs to achieve a variety of purposes, with stable stranding distance, easy to maintain.

Apply for bunching various kinds of cables such as power cables, communication cables, computer and instrument cables, copper conductors, aluminum conductors, BV, BVV, RV, and RVV, etc.

Drum twisting machine is widely used for stranding Milliken conductor and compact conductor in high, medium, low voltage energy cable. Stranding cross section are usually high.

The machine is mainly used for twisting of 7 strands cable with 6+1 structure, suitable for control cable, aluminum stranded, copper stranded etc. The appearance of the unit has been designed by professionals, and the production process has been upgraded.

TSF series is designed machine for official concentric stranding for class 2 conductor, widely used for steel core Aluminum wire stranding, Aluminum and Aluminum alloy wire stranding, copper wire stranding.

Machine adopt individual motor drive system, using different motors for stranding structure and traction unit.

The machine is used for stranding sector conductor of bare aluminum, bare copper wire, ACSR, round compacted conductor with single core pre-forming, drawing and compacting process for power cable.

Convenient centralized loading, correct and reliable positioning, high steel strength, good overall performance, small moment of inertia, high running speed.