留下您的信息
Color Identification Tape
Cable Materials

Products

Color Identification Tape

Introduction

Can be divided into 2 types - High temperature color identification tape and regular temperature identification tape . 

High temperature type is based on PET material, smooth, wrinkle-free, no kinks, no holes, no nicks, no impurities, edge neatly , widely used for power cables, XLPE cables, replace the master batch of insulating or sheathing, can save a lot of costs. After soaking in petroleum paste, the color does not fade and can withstand instant temperature of 230-250℃. 

Regular temperature type can work under the melting point of 168℃ , widely used for color distinguishing in telecommunication cable and high voltage cross-iinked poivethviene insulated cable and local cable.

    idyjzf
    Advantage

    ●Standard

    Do not fade, not migrate , when wipe with alcohol after oil cream soaked.

    Should be smooth, no wrinkles, no kinks , no holes, no cracks and no impurities neat edge.

    Should be neatly wound on the core barrel, the appearance of flat tight, neat at both ends.

    Without side slung, the core barrel is split in two halves or longitudinal, which can be easily removed from the core.

    ●Packing

    In coil with core Dia. 76mm. Carton box.

    ●Color: Red, yellow, blue, green, black and other two colors combination.

    ●Electrical characteristics: Affordable instant 230 ℃ high temperature extruded sheath directly into the nose from the head along with the plastic out by vulcanization pipe and does not fade.

    Specification

    High Temperature Color Identification Tape Type

    Width (mm)

    Specification (μm)

    thickness

    Tensile strength (Mpa)

    Elongation (%)

    Heat shrinkage (%)

    Instantaneous temperature (℃)

    3.0±0.5

    40±5

    125↑

    15↑

    10↓

    180

    4.5±0.5

    40±5

    125↑

    15↑

    10↓

    180

    7.0±0.5

    40±5

    125↑

    15↑

    10↓

    180

    In addition to the above specifications, other special requirements can design according to customers

    Type B : Low temperature identification tape

    Type

     

    PE-2

    PE-2

    Specification

     

    Solid Color

    Two-tone

    Width

    (mm)

    4±1

    4±1

    Temperature resistant

    (℃)

    160~180

    160~180

    Thickness

    (mm)

    0.07±0.01

    0.07±0.01

    Colors

     

    Red, yellow, blue, green, black, orange, white, brown, purple, grey

    White blue, white orange, white gray, white green, white brown, red orange, red blue, red green, black blue, black orange, yellow blue, yellow gray, etc

    Length

    (m/ reel)

    2500±10%

    2500±10%

    Tensile strength

     

    ≥200Mpa

    ≥200Mpa

    Elongation

     

    ≥25%

    ≥25%

    Heat shrinkage rate

     

    ≤3.5%

    ≤3.5%

    Leave Your Message