wire packing machine

Introduction Advantage Specification Available combined Related Products

Automatic Coiling And 1/2 Tie Cable Packing Machine

Introduction

This equipment is suitable for cable automatic coiling and tying package process, which would be packaged into a coil and can be connected to the cable extrusion machine for linkage use.

Advantage

1. It can be supplied by the paying off machine or directly connected to the ejector.

2. The coil output is about 5 times that of manual winding (with 200m long coil as the column).

3. It can be sent out automatically after winding.

4. The machine adopts servo motor alignment system, and the coil is neat and beautiful. The touch screen human-machine interface operation panel can store 99 different wire coil specifications. When changing the specifications, you only need to read the stored data to produce

5. This machine has the function of automatic error detection. It has the contact of power frequency spark machine, which is used for spark detection of BV line. It can automatically detect the spark breakdown point or continue to form a circle after manual marking. (the power frequency spark machine shall be provided by the customer)

Leave a caliper contact: if the diameter does not meet the standard, the waste line can be automatically eliminated or the function of forming a circle can be continued after manual marking. (diameter measuring instruments are provided by each household)

The whole machine truly realizes automatic roll change + heat shrinkable sealing film

Specification

Specification for HH-1230 Automatic Coiling And Tie Machine for reference.

Type	HH-1230
Overall dimension	L2600W1278H2348mm
Circle height	50-100mm
Inner diameter of ring	Φ130-φ160mm(fixed size) one selected by the customer
Maximum outer diameter of circle	φ300mm
Number of ties	Whole roll of primary tie
Outer diameter range of bound wire coil	Φ200-300mm
Winding height of bound wire	Φ50-100
Tie material	OPP The thickness of transparent tie is 0.10mm ~ 0.12mm × 20mm wide
Arm holding mode	Pneumatic arm
Applicable line species	Φ3-φ8mm power cord（BV1.5-6mm²，BVR2.5-10mm²）
Power Supply	AC380V，three-phase,50HZ(China）Or designated by the customer
Gas source	The compressed air pressure is 5-7kg / cm ³
Machine weight	1350kg

Finished Samples

Company Services

Delivery time

1 set 90 days including the test time

After service

1) The machine will be install in HOOHA factory

2）The machine can be making the cable in our factory but the raw material provide from our clients

3）The machine can be PLC control from China and help you install in your factory

4）The machine install process will show you by laying out.

Why chose HOOHA

Before sales

1) 88 successful turnkey factory project .

2)Help over 28 clients from around the globe build their program from the ground.

3)Most humanized cable making solution provided by professional sales team with 10 years experience .

4)Complete access for all aspect of supply chain in professional cable industry with 18 years experience , including manufacturing material , technology , testing equipment , etc .

5)For 15 years , HOOHA stand alongside the client , considering and solving from the perspective of client’s marketing angle with all-around , precise and applicable solution .

6)HOOHA help saving the communication time cost for dealing with over dozens of supplier in the supply chain , mean while clients can generate much more value with same amount of time .

Middle sales

7)10 years experience engineer team for overseas cable and wire industry manufacturing and machinery installation and maintenance .

8)10 years experience engineer planing team for whole factory project including machinery , space layout , operational plan , water air electricity consume , raw material and such .

9)10 years experience professional team working on daily management and operation craft for cable and wire factory .

Vision

1)HOOHA is willing to grow with clients and achieve a mutual victory through business .

2)HOOHA spare no efforts to work for the future that all people is able to use clean electricity energy .