English
Leave Your Message
Copper individual motor drive RBD machine

Rod Breakdown Machine Line

Introduction

Copper individual motor drive RBD machine

DLVF450(-2) Series is type machine is a slight-sliding wire drawing machine with fully submersible lubricant cooling chamber, driven by independent servo motors, specifically design for copper material.

    sddd 8374
    Advantage

    1. Adopt individual motor driving system, each servo motor has its own controlling algorithm with separate servo controller. Main aim is to reduce damage of the wire surface during manufacturing. 

    2. The machine is design for low oxygen or oxygen-free copper conductor rod only, but available to customized based on special requirement.  

    3. Due to the design of individual motor drive, all drawing motors can be turned on and off based on manufacturing size, to achieve energy saving effect compared to traditional gear transmission model. 

    4. Whole line adopt PLC control system, it’s able to collect manufacturing data and signal sync feedback on each motor, to achieve higher delicate control on the finished product detail. Tension control will be more accurate even in high manufacturing speed. 

    5. Drawing cone adopt straight type layout, also equipped with Quick die change system.

    6. Due to low sliding rate, the service life for the dies on this machine would be longer. 

    7. Dual-wire design for double capacity with similar space occupied. 

    Specification

    Single wire model

    Item

    Model

    DLF450/13

    DLF450/11

    DLF450/9

    DLF450/7

    Material

    Low oxygen/zero oxygen copper rod

    Max inlet diameter(mm)

    Φ8mm

    Outlet diameter range(mm)

    Φ1.5~4.5mm

    Φ1.8~4.5mm

    Φ2.5~4.5mm

    Φ3.5~4.5mm

    Max.mechanical speed (m/min)

    1500

    1500

    1500

    1200

    Max number of die

    13

    11

    9

    7

    Mechanical elongation

    26%~50%

    Drawing cone diameter(mm)

    Φ500mm for front 5 , Φ400mm for rear 4 

    Capstan diameter(mm)

    Φ450mm

    Φ450mm

    Φ450mm

    Φ450mm

    Main motor power(kW)

    Servo 55kW

    Servo 55kW

    Servo 55kW

    Servo 55kW

    Capstan motor power(kW)

    AC45kW

    Double wire model

    Item

    Model

    DLF450/13-2

    DLF450/11-2

    DLF450/9-2

    DLF450/7-2

    Material

    Low oxygen/zero oxygen copper rod

    Max inlet diameter(mm)

    Φ8mm

    Outlet diameter range(mm)

    Φ1.5~4.5mm

    Φ1.8~4.5mm

    Φ2.5~4.5mm

    Φ3.5~4.5mm

    Max.mechanical speed (m/min)

    1500

    1500

    1500

    1200

    Max number of die

    13

    11

    9

    7

    Mechanical elongation

    26%~50%

    Drawing cone diameter(mm)

    Φ450mm

    Φ450mm

    Φ450mm

    Φ450mm

    Capstan diameter(mm)

    Φ450mm

    Φ450mm

    Φ450mm

    Φ450mm

    Main motor power(kW)

    Servo 75kW

    Servo 75kW

    Servo 75kW

    Servo 75kW

    Capstan motor power(kW)

    AC55kW

    Available combined type
    Zd5v

    Leave Your Message