English
Leave Your Message
Brass Intermediate Drawing Machine

Single, Dual Wire Drawing Machine Line

Brass Intermediate Drawing Machine

Introduction

Brass wire drawing is the process of reducing a brass wire/rod’s cross-sectional area by pulling via a drawing die. A single or multiple dies can be used to achieve the desired cross-section.

There are several uses to which you apply drawn brass wires across industries. Some of these uses are described below:

1. Brass cables for varied uses such as conductive cables are made by wire drawing.

2. Some wheel spokes can be fashioned by wire drawing.

3. Wire drawing of brass can be used in making springs and paper clips.

4. Guitars, violins, harps, and other similar instruments employ wire drawing to make the strings.

    2023_12_27_14_45_IMG_538182i
    Advantage

    Electrical controlling components: adopting reliable, well-tested electrical controlling components to keep machine stable. 

    Traverse adopt screw drive rod traverse, Electromagnetic clutch reversing, make sure wiring smooth.

    Automatic take-up control with function of automatic stop when bobbins are fully loaded , Automatic stop when the wire is broken, half-full start, automatic stop when traverse error happen, automatic stop when speed regulator or motor is error. 

    Drawing method: horizontal type double axis sliding continuous drawing.

    Dynamic control: drawing machine motor power 22kW, 6 level adjusting, AC ; take-up motor 7.5kW, AC, stepless speed regulation with inverter regulator ; line speed meter could display the current line speed automatically.

    Motor control: double inverter drive, to reduce Mechanical energy loss and save energy . 

    Specification

    Single wire model

    Description

    ZLHF250-11

    Max. inlet diameter(mm)

    φ2.0~3.25

    Outlet diameter range(mm)

    φ0.8~1.8

    Max.mechanical speed(m/min)

    1000

    Max,number of die

    11

    Mechanical elongation

    15%~20%

    Max drawing cone diameter(mm)

    φ250

    Capstan diameter(mm)

    φ250

    Servo motor power(kW)

    10XAC 11

    Capstan motor power(kW)

    AC 15

    Available combined type
    Zxir

    Leave Your Message